Oil nozzle Riello 2.00/45° A

The Riello 2.00/45° A nozzle, art.: 20011662, is designed for high-pressure liquid fuel burners with forced air supply. It atomizes fuel of any viscosity with a homogeneous fine-dispersed stream with a hollow cone. The resulting fuel-air mixture ignites quickly and silently, burns with maximum heat transfer and low emissions of harmful substances.

Features and parameters:

• Hollow spray stream, location of fuel droplets near the cone walls;

• Precise processing of metering parts, assembly with micro-tolerances;

• Spray angle stability regardless of fuel viscosity;

• Brass body with conical head;

• Brass and stainless steel construction;

• Aerodynamic configuration of the atomizer;

• Fuel cleaning from dirt thanks to a filter with pressed balls;

• Knurled thread, eliminating the presence of chips and burrs on the surface;

• Ease of installation and maintenance;

• special rim on the outer part of the body for gripping and tightening with a key;

• permissible deviation from the nominal flow rate ± 4%;

• individual plastic tube with a lid.

Spray characteristics and scope of application

The Riello 2.00/45° A nozzle creates a hollow cone spray at 45°. This jet angle is ideal for narrow and long combustion chambers. Viscous fuel is supplied by a narrower cone, which is corrected by increasing the pressure. The nozzle is suitable for domestic and industrial use, installed in burners with forced air supply and low flow rate.

Advantages:

• atomization of all types of liquid fuel;

• thoughtful design to protect against clogging;

• stability of the angle and spray pattern;

• increased resistance to corrosion and wear;

• flow filtration before spraying;

• threaded connection.

The nozzle has been checked and tested for flow rate, angle and spray quality. On the ANKAS website you can select and buy a nozzle for a burner of any power and configuration.